BIG SUMMER CLEAR OUT
 
PLEASE READ:
I have a selection of reject items that are created from casting resin items. 
The items will vary in their quality and the following detail why the items are reject:
Underfilled OR overfilled meaning the resin might not have reached the right level inside the mould and so it did not fill the moulds fully or there is resin to sand off. 
Bent - the item was removed from the mould too early but if you place it in boiling water and place it on a flat surface it will become straight. 
Tiny appendiges missing - normally feet, heads or very very thin sections. 
The join where two parts of a rubber moulds are joined is mis-aligned making the resin casting slightly unaligned (minor!). 
Air bubbles in the casting that will require filling or sanding. 
Maybe a little rubber trapped in a recess.
None of the items have been finished so the flat sides will need sanding and the line created where the mould joins will need tidying with sandpaper. 
Frames
Large - External 85mm x 70mm
Medium - External 75mm x 65mm
Small - External 42mm x 46mm
 
Tremeau - Height 124mm x Width 70mm
 
Putti Fire Surround -  169mm wide x 115mm High
Opening 102mm high x 80mm wide
 
Lion Corbels 75mm High x 18mm Wide
 
Ceiling rose  large C -  80mm diameter
 
All can be painted but use a primer before painting.
 
Please refer to the main listing of each item for their sizes.